Download PDF of Winch Mount Instructions Here
(If you do not have Acrobat Reader you can download it at www.adobe.com)

Download BWE Installation Instructions Here
(once instructions open click to enlarge)

Frequently Asked Questions

Q: What winches will work with the Lucrum Mount?

A: The Lucrum Mount works with all known winches from 6,000lbs to 16,000lbs without any modification with the exception of the "Warn Powerplant" winch. The "Warn Powerplant" winch will work without any needed modifications to the Lucrum Mount; however the stock bumper and grill would need to be modified.

Q: How long does it take to install?

A: Installation of the Lucrum mount is a good beginner project and for most people can be completed in less than 2 hours.

Q: Do I have to drill holes in the mount for my winch?

A: The lucrum mount comes pre-drilled and ready to bolt on, no modifications or work to the mount is needed to install

Q: What kind of fairlead can I use with the Lucrum Mount?

A: The lucrum mount comes pre-drilled for any fairlead you want to use. You can use a Hawse style for synthetic ropes or a Roller style for steel cables.

Q: What does the Lucrum Mount come with?

A: With your mount you will receive all hardware and detailed color photo step by step instructions.

Q: Is the Lucrum Mount compatible with my stock skid plate or brush guard?

A: The lucrum mount works with all known dealer offered accessories including bumper mounted lights, skid plate, brush guard, etc.

Q: How much does the Lucrum Mount weigh?

A: The Lucrum Mount weights 60lbs with d-rings and about 75lbs with the additional light bar

Q: Is the Lucrum mount the lightest available Bumper/Winch Mount available?

A: Currently the closest competition is about 30% heavier than the Lucrum mount

Q: Is there any other aftermarket winch mount available that keeps the original great look of the FJ Cruiser and looks like it's from Toyota?

A: The PATENTED Lucrum Mount is the only available product that keeps the stock look of your FJ Cruiser and allows you to add a winch mount. The Lucrum mount also retains the outer dimensions of the front bumper and completely conceals the winch behind the stock bumper.

Q : How long does it take to get my Lucrum mount?

A: We try our best to keep your mount in stock. But if your in a hurry please call us first.

Q: What is the finish like of the Lucrum Mount?

A: The Lucrum Mount has a three stage powder coat. Each mount is blasted to remove all possible contaminants and then immediately coated with power and put in the oven. The step is repeated twice for two coats of color and a separate clear coat to protect the finish. The final result is a deep glossy finish that matches the stock silver color of the FJ Cruiser.

Q: What colors does the Lucrum Mount come in?

A: About 95% of our customers request silver, but we have done them in black (both colors match the stock bumper) as well. The Lucrum Mount can be custom matched to any color you want for a additional charge. Also some powders for rare colors are more expensive and can increase cost.

Q: Other Bumper/Winch Mounts require modifications to your suspension because they are so heavy and can lower your suspension, does the Lucrum Mount do this?

A: Because the Lucrum Mount was engineered using CAD design and planned to be strong yet light weight, you do not have to modify the suspension of your vehicle. So far on our own test vehicles, the owner's personal vehicle and our customer's vehicles, we have not had one report of suspension sag or any undesired change in vehicle performance, even on stock suspensions.